Description
TPE-S44 8-Port Smart Switch integrates Power over Ethernet (PoE) and network management features into a cost effective and scalable solution. The TPE-S44 reduces equipment cost by delivering data and power over existing network cable infrastructure.
Features
• IEEE 802.3af Power over Ethernet (PoE) Standard Compliant
• 8 x 10/100Mbps Auto-Negotiation and Auto-MDIX Fast Ethernet RJ45 Ports
• Built-in 4 PoE Ports (Port 1 ~ Port 4)
• Supports PoE Power Maximum 15.4 watts for each POE port
• Supports PoE Powered Device(PD) classifi cation identify
• Full Wire-Speed Non-Blocking Reception and Transmission
• Store and Forward Switching Method
• 96Kbytes RAM Data Buffer and 1K entries MAC Address Table
• Extensive Diagnostic LED’s on the Front Panel
• IEEE 802.3x Flow Control for Full-Duplex Mode; Back Pressure Flow Control for Half-Duplex Mode
Specifications |
Standards |
IEEE 802.1p QoS |
IEEE 802.3 |
IEEE 802.3u |
IEEE 802.3af (15.4 Watts / port) |
IEEE 802.3az |
IEEE 802.3x |
Device Interface |
4 x 10/100Mbps PoE ports (port 1~4) |
4 x 10/100Mbps Fast Ethernet ports |
LED indicators |
Data Transfer Rate |
Ethernet: 10Mbps (half duplex), 20Mbps (full duplex) |
Fast Ethernet: 100Mbps (half duplex), 200Mbps (full duplex) |
Performance |
Data RAM Buffer: 96KB |
Switch Fabric: 1.6Gbps |
MAC Address Table: 2 K entries |
Forwarding rate: 1.19Mpps (64-byte packet size) |
Special Features |
GREENnet energy saving technology |
Power |
Input: 110-240 V AC, 50 / 60 Hz, 0.75 A |
Output: 48 V DC, 0.8 A |
Consumption: 2.1 Watts (Max. without PD) |
PoE |
PoE budget: 30 Watts |
Pin 1, 2 for power+ and pin 3, 6 for power- (mode A) |
Operating Temperature |
0 – 45 °C (32 - 113 °F) |
Operating Humidity |
Max. 90% non-condensing |
Dimensions |
150 x 96 x 28mm (5.9 x 3.8 x 1.1 in.) |
Weight |
370g (12.9 oz.) |
Certifications |
CE |
FCC |